My business relies on the internet; my phone is an IP phone, it uses the internet. If the internet goes down so does most of my business until it comes back up in maybe hours or days. It doesn’t stop there though because even my TV uses the internet these days and then there’s all those cloud services which means some of my data may not be on any of my computers. I’m running a cable internet connection and it’s pretty fast especially when it comes to downloads. The faster the broadband the more we can do with it and the more we rely on it. And … it doesn’t even stop there either! Laptops, mobile phones, tablets, TV’s, set top boxes, NAS drives, stereo systems, cameras etc. use wireless so wireless is really important too.
If you are running an internet reliant business or would really miss your internet connection at home you won’t want it to go down ever! Well, maybe when you are on holiday … uh oh, got a remote security camera linked to your phone through the internet or some other device, maybe a remote internet linked pet feeder or something.
I think most of us want reliable all the 9’s uptime for our internet but of course that’s not always easy to achieve. Making it 100% reliable I cannot promise in fact even all the 9’s is not that easy but I can probably show you how to make your internet faster, have a higher capacity, make it more reliable and improve your wireless WITHOUT SPENDING A SMALL FORTUNE!
A Common Problem
Most homes and small businesses have one internet connection, one line and one router that functions as a router a switch and a wireless access point … true? If any of those elements go down then so might your internet access. You could go ask the neighbour if you could sling a wire through to your business from their supply or ask for their wireless password and maybe sometimes this is ok, it’s a temporary solution of a sort. If you want to be self reliant though you’ll need another solution.
What happens if …
Your router fails
Simple, go get another router, configure it up (hope you know where your broadband login details are) or better still, have another router on standby, just in case! From my experience most people or businesses don’t have a spare. Your current router might be a bit special but anything will do to get you back up and running if a direct replacement is not to hand.
Your internet connection fails
Could be your ISP, a fault on the line or a JCB digging outside. Either way it’s down to the service level agreements of your provider. You’ll probably be down for a few hours, maybe a few days and if you are really unlucky, a few weeks, it happens, especially if the road needs digging up.
Wireless has come a long way but it’s still a flaky service. It depends on lots of things, how many people are already connected, what’s in your building, atmospheric conditions, the type of wireless network you have and the capabilities of the devices you are trying to connect to it etc.
It’s also not so great when you have more than one wireless access point but your device stays connected to the access point you were near 2 minutes ago and which is now nearly out of range. You could be standing next to another access point on the same network but still not connect to it unless you manually do so.
Does all or some of this sound familiar?
There are very fast internet connections with high up-times and excellent service level agreements that mean if your internet connection does go down it gets fixed quickly but of course that can cost a lot of money and a JCB going through the cable is probably going to scupper even that plan for a while. There’s WiMax, line of site links and even satellite connections but, well, it’s a bit expensive and maybe a bit over the top for many.
My suggested solution below is not new but it has improved over time and costs less than it used to. I’m a fan and distributor of Draytek network devices so I’m going to use and suggest Draytek in my solution but you can use other brands solutions too it’s just that I know Draytek works well, is generally of a good quality, has a high specification etc. Lot’s of businesses and computer support companies use them so I guess that’s an endorsement in itself.
More than one
Broadband is pretty cheap so how about 2 supplies over different networks so that if it’s the ISP or just one line that fails then the other is likely to continue to work. Just to make it belt and braces how about feeding in a mobile broadband supply just in case that clumsy JCB comes our way and cuts all the cables to your premises (don’t laugh, this happened to one company I worked for).
In this case you would have 2 broadband feeds going into the same router which would balance all your internet traffic using the 2 services giving you more speed and capacity. If one broadband service fails then the other carries on until the failed service comes back up. If both services fail then the mobile broadband cuts in.
The mobile broadband does depend on the mobile signal you can get where your router is located and whether it’s 3G or 4G but at least it will let you access the internet. If it’s 4G this could be pretty good! You will need to watch your mobile broadband use depending on the tariff you are using but at least you are still up and running.
What if the router fails? Well of course this can happen so for the cost of it I would keep a second router as a backup. You can backup the configuration of the router in use and load it onto the second router. You can backup the configuration each time you change it and either load it onto the second router or at least have it ready. With some Draytek devices, this one included there is 3 year extended warranty available where they will replace your failed device the next working day with no quibbling. You could even use the second router as a second modem if you configure it correctly but that’s a subject for another day.
Improving Wireless Connectivity
Wireless or WiFi has improved over time. The range is greater, it’s more reliable and easier to connect up to than it used to be but it’s still a variable and sometimes quirky technology. If you need a consistent service over a defined area then you’ll probably need to over do it with wireless coverage.
Many routers are not just routers, they are routers, switches, modems and wireless access points. The wireless part of your main router will provide all you need in a small space but as an operating space gets bigger you will need further wireless access points to cover the area. Wireless access points can be obtained for both indoor and outdoor environments and can work well in a campus type environment.
There are two main variants which we can call push and pull systems. To use a couple of techy terms, the wireless system is called the server and your mobile phone, laptop tablet or other wireless device the client.
Most domestic or small office wireless systems are pull systems which means you manually connect your client device to a wireless server. For example, an office or house has 2 access points, one is a wireless router downstairs and the other is a wireless access point upstairs. When your client device is connected to the downstairs router (a server) it stays connected to it until it goes out of range so if you walk upstairs you may need to manually disconnect from the downstairs router and connect to the upstairs wireless access point. It works but it’s clunky and moving smoothly from one wireless zone to another does not occur. Both wireless access points are part of the same system but the connection to them isn’t managed automatically. You could say that you have to pull connections.
Using the same scenario now the wireless system is being managed and pushing connections. The effect is that when you walk up the stairs the wireless management software built into the system monitors it’s connections and as the signal from one wireless access point becomes weaker and another stronger it pushes connection to the stronger wireless access point to your client device such as your phone.
Another great thing about managed wireless is that it will share the load so if several devices are in range of more than one access point those access points can be made to share the wireless traffic instead of one being overloaded and the other hardly used.
Now you can walk up and down stairs with your client device and stay connected without having to think about it. Where two or more access points are located to manage a lot of wireless traffic they can look after the traffic loads so the user gets a good solid wireless service throughout the operating area.
Managed wireless used to be expensive but it’s not now. It does cost more than pull wireless but not much more and is well within credible cost for domestic or small business users. If you need it it’s well worth the modest extra cost.
If you wanted to set up managed wireless using Draytek components you would need either a Draytek Vigor 2860 or a 2925 series router to act as the controller and either a Draytek Vigor AP810 or AP900 wireless access point.
Here is my suggestion for a robust broadband set-up with managed wireless for around £525+VAT for the equipment. All the prices are relevant at the time writing so whilst prices and devices may have changed by the time you read this I am sure this kind of system will be around for a good while yet!
You will also need 2 broadband supplies which can be a mixture of ADSL max, ADSL2+, Fibre known as FTTC or some other suitable broadband/Ethernet supply. You can use Virgin cable broadband. 2 lines carrying BT like broadband will give you 2 lines of voice as well. The cost of installation of the lines and broadband might come to somewhere between £200 and £250 + VAT. Monthly rental for the 2 lines and broadband might be around £60 to £90 + VAT depending on what you have.
- All equipment and line installations maybe ~£775 + VAT
- Ongoing monthly rental, maybe ~£75 + VAT
|Draytek Vigor 2860n ADSL Router||£180.32 + VAT||The most popular business class router from Draytek. It acts as a controller for the managed wireless as well as managing dual broadband connection with a third mobile broadband connection.You could get 2 of these, 1 to use and 1 as backup.|
|Draytek Vigor AP900 Wireless Access Point||£113.85 + VAT||Currently the top of the range wireless access point from Draytek. Lots of speed, power and flexibility.If the wireless range from your w860n router is not enough then get at least one of these.|
|Draytek Vigor 120 Modem||£41.80 + VAT||You may or not need one of these depending on the broadband you have. This can used to feed a second broadband supply to the 2860n router such as ADSL2+. It cannot be used with fibre broadband. Alternatively you could use the backup 2860n as a second feed if configured correctly but you will lose the second feed if the main 2860n goes down and you have to use the backup instead.|
|Draytek ADSL Tailed Microfilter||£5 + VAT||These split your voice and broadband elements into 2 so you can access broadband and make phone calls at the same time.You could get 2 of these, 1 to use and one as backup.|
|Draytek Vigor AP810 Wireless Access Point||£82.80 + VAT||You can use these instead of AP900’s. It’s not quite as fully featured as the AP900 but if you don’t need those features it will work perfectly well with managed wireless.|
|Draytek VigorCare Enhanced Warranty Subscription B||£36.40 + VAT||For Draytek Vigor 2860 series routers. These extended warranties are worth having. They don’t cost much and they will get you a new device the next day. See below for more information*|
|Draytek VigorCare Enhanced Warranty Subscription A||£24.70 + VAT||For Draytek Vigor 120 modem’s and AP900 or AP810 wireless access points. These extended warranties are worth having. They don’t cost much and they will get you a new device the next day. See below for more information*|
*Draytek VigoreCare Extended Warranty Main Features
- One per device.
- Upgrade of warranty to 3-years
- Advanced-Replacement of faulty unit the next working day subject to delivery destination
- Cover for the whole 3-years for one payment
- Available on all DrayTek routers
- Available within 30 days of router purchase
Over the last few months from the 5th September 2012 until the 5th April 2013 I tweeted 100 snippet’s of information about networking, routers, broadband etc. I also published them as updates in LinkedIn and most in eCademy/Sunzu. I hope some people found them useful. I have preserved them here in case anyone would like to dip into them.
The objective was to explain bits of tech in small digestible chunks that were hopefully fairly easy to understand.
05/09/12 – Snippet 1-SSID stands for “Service Set IDentifier”, a name that will easily identify your wireless network, for example “Smith Family WiFi”.
06/09/12 – Snippet 2-Mode: Wireless standard, IEEE 802.11n is latest, older devices may use 11b or 11g. Set your router for 3 most popular; 11b,11g&11n.
07/09/12 – Snippet 3-Wi Fi uses several frequencies , in most cases leave on auto select. If you get interference select a frequency, see if it helps.
10/09/12 – Snippet 4- If you have a wireless device that uses the 802.11b standard you may need to set “Long Pre-amble” to on in your general settings.
11/09/12 – Snippet 5- Mixed “(WPA+WPA2)/PSK” is the better wireless security setting but if you have older wireless devices some will only use WEP.
12/09/12 – Snippet 6-Password protect your WiFi network at least but did u know u can restrict devices that can connect or exclude those that can’t?
13/09/12 – Snippet 7-Did you know you can use a Wireless Access Point to extend the range of your WiFi? http://clixtrac.com/goto/?91551
14/09/12 – Snippet 8-2 wireless Access Points in a router or stand alone can be used to bridge a virtual cable between each other. http://clixtrac.com/goto/?91551
15/09/12 – Snippet 9-Did u know that on some routers you can control which data gets priority so for example voice and video can run more smoothly?
17/09/12 – Snippet 10-Did you know you can get more powerful aerials for your wireless Routers and Access Points. http://clixtrac.com/goto/?91949
18/09/12 – Snippet 11- You are a small business that needs up to 30 phone extensions but the phone system quote seems too much? – http://clixtrac.com/goto/?92122
19/09/12 – Snippet 12-Good broadband supply depends on exchange distance, cable quality, SNR, Attenuation, Latency, Jitter, Packet loss, more later…
20/09/12 – Snippet 13-SNR-Signal to Noise Ratio, can be adjusted if line is noisy, check router status. 6db is good, range 3db-15db, lower is better.
21/09/12 – Snippet 14-Attenuation, measured in decibels, the quality of ADSL signal. 10db is good, 30db ok, 60db acceptable, more than 60db not good.
24/09/12 – Snippet 15- Latency=delay affects speed. Round trip of data in milliseconds=MS 30ms=great, 50=good, 80=ok, 100+=not good, 200+=talk to ISP.
25/09/12 – Snippet 16-Jitter, how much broadband latency (delay) varies, 30ms to 60=ok, 50 to 80=not bad, 100 to 200=not good.
26/09/12 – Snippet 17-Last BB variable-Packet loss=data loss, packets lost are resent=slow BB. <1%=good, 1%-2.5%=ok, 2.5% to 5%=bad, > 5%=talk to ISP
27/09/12 – Snippet 18-If you want to know what broadband is available to you – http://clixtrac.com/goto/?93445, the telecoms industry uses this!
28/09/12 – Snippet 19-A VPN=Virtual Private Network is your own private road from one computer (or device) to another over the internet.
29/09/12 – Blatant Ad-SIP lines £3.50 month, 1ppm UK Nat/Loc , 5ppm UK mobile, per second billing, no minimum or connection charges http://dld.bz/bNE28
01/10/12 – Snippet 20-PRT Ordering files by date works well like this “YYYY-MM-DD Description 01.xxx”.
02/10/12 – Snippet 21-A modem connects to broadband, a router converts broadband to Ethernet, a switch routes Ethernet to various computers/devices.
03/10/12 – PRT – Cracking Draytek High end dual WAN router with £50 cash back only up to the 19th October -http://clixtrac.com/goto/?94173
05/10/12 – Snippet 22-What do all those weird acronyms mean when I try to configure the broadband on my router? – http://clixtrac.com/goto/?94491
06/12/12 – Snippet 23-Type “ip address” in Google and it will tell you what your current public IP address is, try it!
08/10/12 – Snippet 24-Watch out what you sign up for, avoid the unscrupulous baddies http://clixtrac.com/goto/?94736
09/10/12 – Snippet 25- DNS means “Domain Name System”, it translates a web address to an IP address. It’s made up of many servers in many places.
10/10/12 – Snippet 26-PRT MAC stands for Media Access Control. Every network device has a MAC, phones, computers, tablets. It uniquely identifies a device.
11/10/12 – Snippet 27-DHCP=Dynamic Host Configuration Protocol, the system that hands out IP addresses to devices that connect to your network.
12/10/12 – Snippet 28-Static IP address, supplied by your ISP to your router and is always the same, if not static, could change each time you connect.
13/10/12 – Snippet 29-A “Packet” is a unit of data, it can be different sizes and there can be packets within packets, it contains info on what’s in the packet.
14/10/12 – Snippet 30-FTTC=Fibre To The Curb, the latest broadband giving up to 76mbs download and 19mb upload where available.
17/10/12 – Snippet 31-An iPlate, a new cover plate for older phone sockets, it isolates the bell wire which can interfere with broadband.
18/10/12 – Snippet 32-POE=Power Over Ethernet. Power is supplied to a device such as an IP phone from a POE switch instead of using a mains power unit.
19/10/12 – How do I choose the right broadband for me? http://clixtrac.com/goto/?96026
19/10/12 – Snippet 33-QOS=Quality Of Service, give priority to selected data traffic e.g. voice needs to get around fast for a real time conversation!
20/10/12 – Snippet 34-EFM=Ethernet First Mile, 2/4 ADSL supplies bonded together to give much better internet connectivity from exchange to premises.
23/10/12 – Snippet 35-VoIP=Voice over Internet Protocol, phone calls over internet & works well these days, costs less, does more! http://dld.bz/bQvXm
31/10/12 – What would combining 4 x broadband supplies into one do for your business or organisation? http://clixtrac.com/goto/?97233
31/10/12 – Snippet 36-DoS/DDoS=Denial Of Service, example; someone attacks a server with a flood of data so you can’t access a web site hosted there.
01/11/12 – Snippet 37-WLAN Bridging is a method of beaming a wireless link from one location to another as if it was a network cable.
02/11/12 – Snippet 38-Annex M is a high specification ADSL2+ broadband giving up to 16mbs or 24mbs download and 2.5mbs upload speeds.
03/11/12 – Snippet 39-SMTP=Simple Mail Transfer Protocol, simply the protocol / standard for sending email around. Email to SMTP, receive from POP.
04/11/12 – Snippet 40-POP3=Post Office Protocol and is simply the standard / protocol for receiving you email. Email to SMTP, receive from POP.
07/11/12 – Snippet 41-LLU=Local Loop Unbundled, this is where a supplier such as Orange or TalTalk have their own equipment in a BT exchange.
09/11/12 – Snippet 42-SIP=Session Initiation Protocol. This is the open standard used most frequently to make phone calls over the internet.
10/11/12 – Really excellent value for money IP PBX’s (phone systems) http://clixtrac.com/goto/?98331
15/11/12 – Snippet 43-A Dongle-Small device which plugs into computer via USB/other connection, offers a service e.g. WiFi, 3G broadband security etc.
16/11/12 – Snippet 44-Network Adaptor or Home Plug. A plug that allows you to run your local network over the mains, sometimes with built in wireless.
05/12/12 – Snippet 45-The Cloud-A secure place on the internet somewhere to store things so that they can be accessed from anywhere.
07/12/12 – Snippet 46-Unmanaged switch-Simple switch that allows you to distribute to between 4 and 48 network devices from each switch.
08/12/12 – Snippet 47-Managed switch-Configurable sophisticated switch that allows you to distribute to between 4 and 48 network devices from each switch.
10/12/12 – Snippet 48-WD-WRT A Unix based Open Source standard firmware for routers – http://www.dd-wrt.com/site/index
14/12/12 – Snippet 49-Homeplug Mains network adaptor – used to connect network devices over mains electric circuits, some have wireless access points
17/12/12 – Snippet 50-I want to setup a wireless network part 2! – https://iwantrouters.wordpress.com/2012/09/03/i-want-to-setup-a-wireless-network-part-2/
18/12/12 – Snippet 51-ATA=Analogue Terminal Adaptor, device for using analogue devices (a phone) with local or external IP services, IP PBX’s or SIP
20/12/12 – Snippet 52-SSL=Secure Socket Layer, a secure encrypted method of sending information over the internet. See also Snippet 53-TLS.
20/12/12 – Snippet 53-TLS=Transport Layer Security, newer secure encrypted method of sending information over the internet, replaces SSL see Snippet 52
21/12/12 – Snippet 54-Popular voice over internet quality levels G729=low, G711=high, G722=Wideband or HD. Set to G711 for best compromise.
24/12/12 – Faster, more reliable, inexpensive connectivity for business or where internet connectivity is vital – http://clixtrac.com/goto/?93428
27/12/12 – Snippet 55-Data Encryption–transmit data in a form that cannot be understood if intercepted. Various levels of security can be implemented.
28/12/12 – Snippet 56-PBX, Private Branch Exchange. A phone system, used by businesses etc. You can get Analogue/digital/IP PBX’s.
02/01/13 – Snippet 57-PPPOA=Point to Point Protocol over ATM, a protocol used to validate and keep alive your internet connection to your ISP.
06/01/13 – Snippet 58-A/DSL Microfilter-a small box or socket that separates the voice and broadband (DSL) elements on a single analogue phone line.
07/01/13 – Snippet 59-Gigabit Vs 10/100-Gigabit is 10 times faster than 100mbs and 100mbs is 10 times faster than 10mbs networks. Gigabit is the latest
07/01/13 – Learn about broadband, routers, networking, wireless networking etc with the jargon explained – http://clixtrac.com/goto/?104372
17/01/13 – Snippet 60-IP Phones work globally if there is a reasonable connection. Take your IP phone from UK to Australia, it will work, same number!
21/01/13 – Snippet 61-AP=Access Point usually re Wireless. Part of a router or a separate box, transmitter / receiver 4 wireless devices to attach to.
22/01/13 – Snippet 62-WCF=Web Content Filtering, flexible access control to websites and website types, parental control, time based restrictions.
04/02/13 – Snippet 63-Decibal (Db) is the unit of measurement for wireless (WiFi) signal strength, 2Db is low, 12Db is high.
06/02/13 – Snippet 64-BLF=Busy Lamp Field, telecom term, when lit, shows when other phones are in use = when other people are currently on the phone.
10/02/13 – Snippet 65-U=the height a computer related device takes up in a 19” or 23”rack. 1u=44.45mm/1.75” high.
11/02/13 – Snippet 66-SNMP=Simple Network Management Protocol, used for administrating, configuring and monitoring computer networks http://www.net-snmp.org
13/02/13 – Snippet 67-OSI 7 Layer model. How computers & other devices communicate on local networks & the internet. See next 7 snippets for each layer
14/02/13 – Snippet 68-OSI 7 Layer model, layer 1 is the physical layer, wires/cables, the, connectors, plugs, wireless signal, electricity etc.
15/02/13 – Snippet 69-OSI 7 Layer model, layer 2 is the basic high speed transmission of data from point to point regardless of the meaning of the data.
18/02/13 – Snippet 70-OSI 7 Layer model, layer 3 is concerned with the size, routing & integrity of data, making sure data arrives safely.
19/02/13 – Snippet 71-OSI 7 Layer model, layer 4 data is transported to the upper layers as reliably as possible so that SW can use it effectively
20/02/13 – Snippet 72-OSI 7 Layer model, layer 5 establishes and terminates connections locally and remotely between applications
21/02/13 – Snippet 73-OSI 7 Layer model, layer 6 makes sure data is presented to applications in the form they understand
22/02/13 – Snippet 74-OSI 7 Layer model, layer 7 is the applications handling of network data and their internal processes.
23/02/13 – Snippet 75-OSI 7 Layer model names, 1-Physical, 2-Data Link, 3-Network, 4-Transport, 5-Session, 6-Presentatio, 7-Application.
24/02/13 – Snippet 76-Load Balancing is a way of connecting 2 or more broadband supplies to a single router so that they act as 1 broadband supply.
27/02/13 – Snippet 77-Omni directional-When a radio signal radiates out in all directions, 360 degrees
28/02/13 – Snippet 78-Unidirectional-When a radio signal is focused into a cone radiating out 70 degrees for example.
01/03/13 – Snippet 79-HTTP=HyperText Transfer Protocol, tells network programs that web pages are being worked with and how to handle them.
02/03/13 – Snippet 80-HTTPS-The same as HTTP but a secure version using SSL/TLS which is a system for encrypting data. On web pages in this context.
04/03/13 – Snippet 81-A basic byte is made up of 8 bits, a bit is a 0 or a 1. The smallest value is on the right 00000001=1, 00000010=2, 00000011=3 etc
05/03/13 – Snippet 82-CAT 5/6 or Category 5 or 6 networking cables have 8 wires in them and are used in home, office and national networks such as BT.
06/03/13 – Snippet 83-RJ45, a common type of 8 pin plug used for CAT 5/6 cabling. It is fairly square in design with a clip to secure the connection.
07/03/13 – Snippet 84-RJ11, a common type of 6 pin (4 or 6 pins are active) plug used for phone, modem connections etc. similar but smaller than RJ45.
08/03/13 – Snippet 85-Plug connections. You have an RJ11 plug with 6 pins, 4 or 6 pins might be connected e.g. 6PC4 = 6 pins but only 4 connected.
11/03/13 – Snippet 86-UK BT plugs fit an NTE5 socket. 2 types now 431A and 631A, P6C4 & P6C6 respectively, an oddity as the RJ11 would be more standard.
12/03/13 – Snippet 87-USB=Universal Serial BUS. 6 types of plug, used for phones, computers, printers, mice, nearly everything – http://dld.bz/cpKxg
13/03/13 – Snippet 88-Buffer, memory reserved as a capacitor. Like a bucket of water that is always topped up so that it never runs out.
15/03/13 – Snippet 89-NAS-Network Attached Storage-Box with 1 or more hard discs in it & enough circuitry and software to share data across a network.
18/03/13 – Snippet 90-BUS-Name of the internal connection architecture of all the components in a computer. E.g. so a hard drive can talk to a CPU etc.
19/03/13 – Snippet 91-SATA=Serial Advanced Technology Attachment, a type of bus designed for mass storage devices like hard disks.
20/03/13 – Snippet 92-DMZ, derived from “DeMilitarized Zone”. A kind of neutral sub network zone used to protect more sensitive network areas.
21/03/13 – Snippet 93-TCP/IP=Transmission Control Protocol/Internet Protocol, this protocol streams raw octal data around the internet reliably.
23/03/13 – Snippet 94-Hidden SSID=“Hidden Service Set IDentifier”. Your wireless network cannot be seen publicly you have to know the name of it.
25/03/13 – Snippet 95-“Failover”, term used to describe switching from one service or device to an alternative where available if the current one fails
29/03/13 – Snippet 96-4G=4th Generation, a new standard of mobile broadband. 2 types, WiMax & LTE (Long Term Evolution). Unclear how good it will be.
02/04/13 – Snippet 97-EWAN=Ethernet Wide Area Networks. Remote connections functioning at Ethernet level as if plugging in a LAN cable
03/04/13 – Snippet 98-Hosted Telephony. A phone system hosted remotely by a provider, you access it & make calls over broadband. You just have phones.
04/04/13 – Snippet 99-GUI=Graphical User Interface. Outmoded term, nearly all our interactions with programs are GUI now. Alternative to command line.
05/04/13 – Snippet 100-The internet-Every computer, mobile, device attached to the internet is part of it and is it. It is the sum of its parts.
One of the subjects asked about more often than others is wireless networks, how to set them up or some aspects of it. With soooo many devices connecting wirelessly this is not surprising. Devices such as tablets, phones, laptops, media systems, wireless storage even desktops these days, the list is ever increasing. There are lots of options available now to help you setup wireless networks that work well and its’ getting better all the time.
Wireless technology in itself is not easy though as everything seems to effect it; the building you are in, the position of aerials, people walking in a room, the traffic, the atmosphere, interference from other wireless device, the list goes on. Fear not though, with a little thought and perhaps experimentation within your chosen site a reliable wireless network can be setup without spending outrageous amounts of money on it. Those clever people who produce wireless equipment are getting smarter all the time.
This article is aimed at home and small to medium size businesses and I hope you will find it easy to understand, there are lots of pictures and diagrams to help clarify things so I will split it into several parts, 3 should do I hope. Large companies will have their own IT departments to sort it all out for them. Having said that I cannot think why the methods in this article cannot be scaled up to whatever size of network you want, the principles remain the same.
N Class devices
The current wireless standard “n”, also known as “IEEE 802.11n-2009”, is much better than the standards that went before it and most devices on this standard will work with other older wireless devices. I’m sure better standards will come along in the near future, in fact a new whizzy standard is in draft form right now. The range of a particular device is dependent on many factors as already mentioned but you might get 70 meters indoors and I have seen up to 250 meters mentioned for outdoors but I think that would be exceptional. There’s a Wiki article if you would like to swat up on it.
Here are the ingredients for our wireless network, use them as needed, you probably won’t need all of this. Let’s start off with the equipment.
Wireless access points, routers etc
In some part of your network you will probably want to be attached to the internet. For many setups this will be using broadband via a DSL modem or router. To make it easy most people / businesses use a device with a built in DSL (broadband) modem, a switch and a wireless access point. Here are some examples of various routers and modems with and without wireless:
Wireless access points can be obtained to extend the range of your wireless network. If your office is bigger than the range of a single wireless device, is divided into offices or is on several floors you may need more than just the router with a built in wireless access point. You can either plug another access point into your network:
or use it like a repeater so that it will connect wirelessly to another wireless access point like your router and create its own wireless area:
You can also use a wireless access point to act as a bridge linking for example one building to another without using cables:
Here are a few examples of wireless access points:
Note that the Billion network adaptor version can be plugged into your mains electricity supply if your network has been attached to your mains electricity supply. That is, either a network cable is plugged into this wireless network adaptor or another network adaptor on the same mains circuit.
Another way of increasing the strength of signal and consequently the range of wireless devices is to use better aerials. Aerial strength is measured in decibels (db) and there are two types of aerials we can use. Omni-directional; this means the aerial works in all directions, 360 degrees around it:
and directional which focuses the signal so that a strong signal can beamed in a particular direction, this is particularly useful for bridging two locations together.
A stronger aerial can either directly replace the aerial(s) you currently have or linked to your device by a length of cable. Some aerials can be mounted on walls.
Most devices come supplied with 2db or 3db aerials but it is possible to replace them with up to 10db aerials which are quite a bit more powerful.
It’s worth noting that on some devices that come with more than one aerial some of them might be used to transmit and receive and some might be used to receive only. You can check the manual or datasheet that comes with your device.
Here are a few examples of some aerials:
Dongles and devices with built in connectivity
Most devices such as laptops, tablets, mobile phones etc have built in wireless connectivity these days and if it’s a fairly recent device then it will probably be wireless N. If your device doesn’t have wireless connectivity or it is old then this may not be a problem as there are plug in devices you can use to get around this.
Let’s say you have a desktop or laptop computer with no wireless connectivity or an old wireless standard that you want to override! No problem, you can either plug in a USB dongle or install a PCI wireless adaptor.
Measuring the signal, the wireless survey
Before or after you set up your wireless network you might want to perform a wireless survey. This is about the strength of signal you are going to or do get in the places you need wireless to work. Things like thick walls or steelwork in a buildings structure, the distance from an access point etc can all have an effect. There are 2 ways of approaching this; you can either obtain the equipment or hire someone who has it to perform a wireless survey before you start setting it up or you can setup the wireless network first with a little judgement and then adjust things as you go along. The former method might give you a better start but if your setup is simple you may not need to fuss too much. If you have a small office, say 1,000 foot square then a single wireless router will probably do what you need.
If you want to perform a wireless survey before you install the wireless network then you can obtain the software and devices needed for it but unless you are quite enthusiastic about it I recommend you get in a trusted expert in this field. I’m not going to go into this area too much now but there are quite good articles available, here is one that is quite good on the Computer World web site.
If you just want to consider your wireless network, set it up and check it then there are some great aps out there for Apple and Android tablets and mobile phones. They may not be “professional” if anyone wants to get snobby about it but they will do the job. I have been using WiFi Analyzer on an Android phone (an HTC Desire HD) which seems to work pretty well!
Whichever way you do it, consider the following before you start:
- What are the areas you want the wireless network to cover. A floor plan would be helpful.
- Identify the objects that might affect the wireless network such as walls, halls, elevators and floors. You might needs some extra devices or careful siting of them to get around these things.
- Identify where the wireless network will be used.
- Identify where it won’t be used as you don’t need to cover this area.
- Depending on where you want to site access points, aerials consider where any network or mains cables need to run and are mains outlets available where you need them?
- Access points are best mounted high, near or on the ceiling is good. Watch out for metal or concrete walls or structures that can interfere with/block wireless signals.
- How many access points do you need, if they are wireless N, you are indoors and there is clear line of site then 25 metres radius per point might be sufficient although a smaller radius is probably better!
Once you have everything up and running make a rough map of the wireless areas and the strength of signal there. Monitor and adjust as necessary by re-siting access points, using different aerials, adjusting aerial positions or increasing the number of access points. The phone ap is really good for this. It’s like baking a cake, adjust the ingredients until the cake tastes to your liking!
I guess that’s enough for one chunk, now we know what bits of equipment we can use. In the next article I will talk a bit more about the configuration of it and how the wireless network may behave.
How am I doing, do you have any suggestions on how I could improve this article?